Solar and battery systems designed for San Clemente homes on San Diego Gas & Electric (SDG&E) — NEM 3.0–optimized, battery-ready, all-black panels. We model your real usage and rates before talking payback. Tesla Certified Premium Installer · CSLB #1031989/#1055444.
Reviewed by Los Angeles & Orange County homeowners
| Project path | Best fit | Key review |
|---|---|---|
| Solar panels | Serviceable roof | Array size, shade, utility rules and permits |
| Solar + battery | Backup or self-consumption goals | Battery sizing, protected loads and rate strategy |
| Roof + solar + battery | Aging roof | Roofing sequence, waterproofing, layout and storage |
San Clemente gets strong, consistent coastal Los Angeles sun — marine-layer mornings that clear to strong afternoon sun — good conditions for solar when the system is sized to your actual roof, shade and usage rather than a generic estimate.
We design and install complete solar-and-storage systems for San Clemente homes — and pair them with roofing, HVAC and EV charging when it makes sense to plan the work together.
Panel & battery brands we install in San Clemente: REC, Q CELLS, Mission Solar, Panasonic and Silfab solar panels with Enphase microinverters, plus Tesla Powerwall 3 and Enphase IQ battery storage. We recommend the panel and battery that fit your roof, goals and budget.
Real numbers depend on your roof, usage and design — these ranges are a starting point, not a quote. We give you an itemized proposal after a site review.
| System | Typical Range | Notes |
|---|---|---|
| 6 kW solar (all-black) | $17,000–$22,000 | Project-specific review required |
| 8 kW solar | $22,000–$28,000 | Project-specific review required |
| Solar + Tesla Powerwall 3 | $34,000–$46,000 | Before any incentive or financing |
| Add Powerwall to existing solar | $12,000–$18,000 | SGIP review where eligible |
Under NEM 3.0, exporting power to SDG&E earns little, so the goal is to use what you generate. A well-designed San Clemente system shifts as much of your usage as possible to daytime solar and stores the rest in a battery for evening and outages. We don't quote project-specific payback — we build a model from your real bill, rate plan, roof and usage so you can decide with honest numbers.
San Clemente is a coastal south-OC community where ocean air and hillside lots are common considerations. Roof condition, orientation and shade drive the array design, and panel appearance may be subject to HOA or design-review guidelines. Coastal exposure is factored into mounting and hardware choices. SDG&E rules and any rebate or net-metering eligibility (NEM 3.0, and SGIP for batteries where eligible) should be reviewed for the specific property.
Planning: start a solar estimate · see all Los Angeles & Orange County service areas.
One licensed team for solar, battery, roofing and EV charging. Free estimate, project-specific economics review, financing available.
It can be, but the design has changed. Under SDG&E's NEM 3.0 net-billing rules, credit for exported power is low, so the value now comes from using your own solar during the day and storing the rest in a battery. We model your actual usage, roof and rate plan before discussing payback — we do not promise any specific bill reduction or financial outcome.
Under NEM 3.0 most San Clemente homeowners see better economics pairing solar with a Tesla Powerwall or Enphase battery, because stored energy offsets expensive evening grid power and can back up essential circuits during outages. Whether a battery is right depends on your usage, rate plan, backup goals and budget.
If your roof is near the end of its life, it is usually best to replace it first — removing and reinstalling panels later adds cost. We review roof age, condition and layout before designing the array, and can handle the roof and solar together.
San Clemente is in SDG&E territory, so the Self-Generation Incentive Program (SGIP) may help fund a qualifying battery, subject to funding and eligibility. California also excludes the added home value of solar from property-tax reassessment. Financing is available on approved credit. We review what you qualify for before discussing project economics.
Most San Clemente installations take one to three days on site, but the full timeline depends on design, City of San Clemente permitting and SDG&E interconnection and permission to operate (PTO). We coordinate the permits and utility steps and keep you updated at each stage.
Free project review. Battery-ready design. Project-specific savings review — no project-specific payback claims. Financing available. Tesla Certified Premium Installer. CSLB #1031989/#1055444.
